Table of Contents
Advertisement
T
About HydroPower RO S
2
Using the HydroPower RO S
2.1
Intended use
2.1.1
The HydroPower RO S is used for the filtration of drinking water by demineralisation for the purpose of
glass and surface cleaning.
The HydroPower RO S is intended for commercial use only.
The HydroPower RO S may only be connected to drinking water lines.
Foreseeable misuse
2.1.2
The use of the HydroPower RO S in any way other than described in the chapter „2.1.1 Intended use" is
considered to be non-compliant and thus unlawful.
This applies in particular to the use of the HydroPower RO S for bacteria removal.
Technical specifications
2.2
Operating conditions
2.2.1
Ambient temperature [°C]
Water temperature [°C]
Electrical specifications
2.2.2
Primary electrical connection [V / Hz]
Power consumption
Protection types of electrical components
2.2.3
Electric motor
Pump Control
10
HydroPower® RO S
Technical specifications
ATTENTION
Material damage due to improper handling.
Ensure that the incoming water corresponds to the national drinking
water regulations.
The drinking water must be free of iron, manganese and heavy metals
(max. 0.2 ml / l iron, 0.05 mg / l manganese), the maximum silicate (SiO2)
content must not exceed 20 mg / l. It must also not contain barium and
strontium.
5 ... 40
5 ... 25
230 / 50
0,97 kW
IP 54
IP 65
www.ungerglobal.com
Advertisement
Table of Contents
