unGer HydroPower RO S Operating Instructions Manual page 23

HydroPower® RO S
Malfunctions
Overheating
Always ensure that the HydroPower RO S is well ventilated and is not too close to objects or walls
which could cause air circulation prevent.
1. If the pump motor overheats, the HydroPower RO S automatically stops.
2. Switch off the system at the lower switch.
3. Let the HydroPower RO S cool down.
4. Start the HydroPower RO S with the lower switch (e.g. PURE).
5. If the pump does not start, press the red RESTART button on the backside of the
casing for about 5 seconds.
The HydroPower RO Starts again.
`
If the system does not start, let the HydroPower RO S cool down even further.
23