General Information; Scope Of Manual - Flowserve NAF ProCap User Instruction

Capping valve
Table of Contents

Advertisement

NAF ProCap Capping Valve User Instruction - FCD NFENIM4155-00-A4 11/18

1 General Information

1.1

Scope of manual

These instructions must be kept close to the product's operating location or directly
with the product.
These instructions must be read prior to installing, operating, using, or maintaining
the equipment in any region worldwide. The equipment must not be put into service
until all of the safe operating conditions noted in the instructions have been met. Failure
to comply with the information provided in the User Instructions is considered to be
misuse. Personal injury, product damage, delay in operation, or product failure caused
by misuse are not covered by the Flowserve warranty.
This instruction provides necessary information for the correct handling of the NAF
ProCap Capping Valve. For additional equipment used together with the valve, please
refer to their corresponding instructions.
If you have any doubt about the correct use and handling of a specific version of NAF
ProCap Capping Valve, please contact your Flowserve representative.
The instructions and list of spare parts in this document are applicable to the NAF ProCap
Capping Valve in accordance with our Technical Bulletin NFENTB4155.
As the NAF ProCap Capping Valve is a special applications valve, special terms and
conditions may apply. Please refer to specific purchase.
Page 3 of 78

Advertisement

Table of Contents
loading

Table of Contents