Safety Instructions - Sola Go! SMART Operating Instructions Manual

EN

4. Safety Instructions

4.1 AREA OF RESPONSIBILITY
4.1.1 Manufacturer
SOLA is responsible for delivering a safe and immaculate product, including the operating manual and
original accessory equipment.
SOLA-Messwerkzeuge GmbH
Unteres Tobel 25
A-6840 Götzis
4.1.2 Operator
The operator is responsible for using the product as intended, the deployment of personnel,
their training and the operational safety of the product.
The operator understands the safety information which is stated on the product and the instructions in
the operating manual.
The operator shall comply with the standard local regulations relating to safety and accident prevention
regulations as well as worker protection laws and regulations.
The operator shall immediately notify SOLA if safety-related issues should arise relating to the product
or during its utilization.
The operator shall ensure that the product is not utilized any further if defects become evident, and
they will have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits (see Chapter 3 / Technical data).
Use under extreme temperature fluctuations without an adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modifications or alterations to the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization limitations
The Go! Smart is suitable for continuous use in an atmosphere which can be inhabited by humans.
Do not operate the product in explosion-prone or corrosive environments.
KESON LLC
810 N. Commerce St.
Aurora, Illinois 60504
7