1
8.2 UPDATING OF THE FIRMWARE
Power ON (In Firmware Update Mode)
A
While pressing the [ MODE ] button and [ HOLD ] button
simultaneously, turn ON the power supply.
(To begin start-up at the firmeware update mode.)
B
Press and hold the button
Keep pressing the [ MODE ] button and [ HOLD ] button
until the page for displaying [Connect USB storage device
into top USB1 ] will appear on LCD display.
C
Insert a USB Memory
Insert a USB memory (seved UPD file) to the USB terminal.
(Once inserted, please wait about 10 seconds.)
D
Firmware Update
Progress bar will appear on LCD display to start the update.
E
Untill the updates in complete, it takes about two minutes.
* Update is complete, please disconnect the USB
memory after you turn OFF the power.
F
58
1
2
TSP-16
2
3
[MODE] button
[ HOLD ] button
[MODE] butoon
[ HOLD ] butoon
Connect USB storage device into top USB1
Connect USB storage device into top USB1
Ver.*.**
MAIN system:* - >* apl:* -
SUB1 Rev* - > Rev
SUB2 Rev* - > Rev
3
4
Power
ON
USB memory
- > Ver.*.**
>*
38%
*
38%
*
38%
4