PIONEER DJ TSP-16 Service Manual page 44

1
A
PAGE 8 : DEVICE TEST
MIDI CHECK
MAC ADDRESS : **:**:**:**:**:**
IP ADDRESS
B
• Mode for checking DIN-MIDI route.
• MAC/IP address can be also checked.
Carry out feedback connection for DIN-MIDI out and in of this unit with MIDI cable.
Then, press MIDI-CHECK button. Check result will be returned.
PAGE 9 : MASS STORAGE
C
• This is the mode for executing FAT quick format to the built-in eMMC memory.
D
• Touch "START" button long for five or more seconds on this mode and connect USB-B terminal of this unit and PC
with USB. Then, this unit will be recognized as a mass storage on the PC.
Quick format of this unit from PC with FAT will be enabled.
* Before leaving this mode, execute "Removal of device" from PC and touch "END" button, then remove the device.
PAGE 10 : PRESET SAMPLE COPY
E
• This is the mode for transferring the factory shipment preset sound source to the built-in eMMC memory.
• Connect the USB flash memory to USB-A terminal of this unit on this mode and press "START COPY" GUI button.
F
Then, transfer of preset sound source will start.
* After transfer is completed, touch "UNCONNECT" GUI button and disconnect the USB flash memory.
44
1
2
[PAGE 8] DEVICE TEST
: [OK, NG]
: ***.***.***.***
[PAGE 9] MASS STORAGE
START
[PAGE 10] PRESET SAMPLE COPY
START COPY
0%
TSP-16
2
3
END
UNCONNECT
3
4
4