Service Mode; Test Mode - PIONEER DJ TSP-16 Service Manual

5

6. SERVICE MODE

6.1 TEST MODE

Outline of Test Mode
The following modes are provided in Test Mode of this unit:
 Version Display Mode
 Mode for Making All LEDs Light On
 Mode for Making All LEDs Light Off
 PAD Calibration Mode
 Mode for Confirmation of the Buttons
 Mode for Confirmation of the VRs(AD Value)
 Mode for Confirmation of the Encoders
 Touch Panel Confirmation Mode
 Device Information Display Mode
 Built-in Memory Quick Format
 Built-in Memory Write Mode
@ Mode for Confirmation of the Audio Route
> Factory Reset
Startup Method in Test Mode
(1)
(2)
(3)
While pressing the buttons (1) to (3) simultaneously, turn ON the power supply.
Keep pressing the buttons (1) to (3) until the mode for displaying the version will appear on LCD display.
Method for Switching Mode
If you press the button (1), the next mode will be displayed.
If you press the button (2), the previous mode will be displayed.
Method for Quitting the Test Mode
Turn OFF the power supply.
5
6
(PAGE 0 : VERSION)
(PAGE 1 : LED TEST(1) - ALL ON)
(PAGE 2 : LED TEST(2) - ALL OFF)
(PAGE 3 : PAD CALIBRATION MODE)
(PAGE 4 : BUTTON TEST)
(PAGE 5 : AD TEST)
(PAGE 6 : ENCODER TEST)
(PAGE 7 : TOUCH PANEL TEST)
(PAGE 8 : DEVICE TEST)
(PAGE 9 : MASS STORAGE)
(PAGE 10 : PRESET SAMPLE COPY)
(PAGE 11 : AUDIO TEST)
(PAGE 12 : FACTORY RESET)
(2) (1)
TSP-16
6
7
(1)HOLD button
(2)TRACK button
(3)16 STEP 1 button
(1) HOME button
(2)BACK button
7
8
A
B
C
D
E
F
39
8