ATEN Altusen KL1116L User Manual page 79

Appendix
2. Attach the left and right easy-installation mounting rails to the inside of
the rack. The flange that supports the switch will be to the inside.
Rear Flange
Slide Bar
Front Flange
Rear Attachment
Sliding Bracket
LEFT
Support
RAIL Flange
RIGHT
RAIL
a. Screw the front flanges to the rack first.
b. Slide the bars with the rear flanges toward the rack until the flanges
make contact with the rack, then screw the rear flanges to the rack.
65
2005-11-04