KL1116 User Manual
5. Power up the installation according to the following procedure:
a. Power on the First Station (KL1116).
Wait a few seconds for the unit to ascertain its Station ID.
b. Power up each daisy chained Station on the installation in turn (Sec-
ond Station, then Third Station, etc.). Each KH0116 has a LED display
on its front panel to indicate its Station ID (the Station ID for the First
Stage unit (KL1116) is 01, the ID for the Second Stage unit (the first
KH0116) is 02, the ID for the Third Stage unit is 03, etc.).
In each case, wait for the Station ID to be ascertained and displayed on
the Station ID LED before plugging in the next Station.
c. After all the Stations are up, power on the computers.
KL1116
KH0116
14
2005-11-04