ATEN Altusen KL1116L User Manual page 5

! To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
uninterruptible power supply (UPS).
! Position system cables and power cables carefully; Be sure that nothing
rests on any cables.
! When connecting or disconnecting power to hot-pluggable power
supplies, observe the following guidelines:
! Install the power supply before connecting the power cable to the
power supply.
! Unplug the power cable before removing the power supply.
! If the system has multiple sources of power, disconnect power from the
system by unplugging all power cables from the power supplies.
! Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
! Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
! If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
! The power cord or plug has become damaged or frayed.
! Liquid has been spilled into the device.
! The device has been exposed to rain or water.
! The device has been dropped, or the cabinet has been damaged.
! The device exhibits a distinct change in performance, indicating a need
for service.
! The device does not operate normally when the operating instructions
are followed.
! Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
KL1116 User Manual
2005-11-04
v