Silicon Graphics 1450 Mounting Instructions page 11

0.
007-4242-001
SGI 1450 Server Mounting Instructions
This guide provides information on mounting the SGI 1450 server in a 19-inch rack.
To obtain SGI documentation using the World Wide Web, see the SGI Technical
Publications Library at http://techpubs.sgi.com. Enter a keyword search, or
search by title to find the information or manual you need.
Warning:
To avoid personal injury when unpacking the server, use only a
mechanical assist unit to lift it off the shipping pallet. The minimum server
configuration weighs 26 kg (57 lbs); the maximum configuration weighs 40 kg (88 lbs).
Do not attempt to lift or move the server by the handles on the power supplies. Use
only a hand-truck or other mechanical assist unit to move the server from one location
to another.
This guide contains the following sections:
• Unpacking and Inspecting the Server
• Determining Space Requirements
• Observing Pre-Installation Safety Precautions
• Preparing the Slide Assemblies
• Preparing the Server
• Attaching EIA Rail Brackets
• Attaching the Slide Assembly to the Rack
• Placing the Chassis in the Rack
• Installing Handles
• Attaching the Front Bezel to the Chassis
• Removing the Server from the Rack
1