Inbetriebnahme; Netzbetrieb; Putting Into Operation; Mains Power Supply - wtw LF 538 Instruction Manuals

Microprocessor conductivity meter with standard conductivity cell tetracon 325
Table of Contents

Advertisement

Netzbetrieb

Mains power supply

Als Steckernetzgerät nur das Friemann und Wolf Ladegerät, Modell FW1199
verwenden.
For power supply use only the Friemann and Wolf Line Adapter, model FW1199.
Friwo FW1199/11.7864, Friwo Part. No. 1762613
Input:
230 VAC (+10%/-15%)/ 50 Hz / 5.6 VA
Output: 12 VDC / 130 mA / 1.56 VA
Friwo FW1199/11.7880, Friwo Part. No. 1794043
Input:
120 VAC (+10%/-15%)/ 60 Hz / 6 VA
Output: 12 VDC / 150 mA
Die Netzspannung muß mit der am Steckernetzgerät
angegebenen Betriebsspannung übereinstimmen!
Before the instrument is plugged in and switched on, it has to be
controlled if the working voltage of the instrument and line voltage
are corresponding!
Avant de brancher et d'allumer l'instrument vérifier la tension !
Steckernetzgerät am Stromnetz und am Gerät einstecken.
Connect power-supply unit with electric circuit and the instrument.
14

Inbetriebnahme

Putting into operation

Belegung:
Connections:
1+12 Volt input
2 Masse / Ground
Einschalten /
BA51101/11.95/Pro/LF538-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents