Gas Section; Gas Installation Requirements - Haier JZT-QHA9331P Installation Instructions Manual

Built-in gas cooking hobs
Table of Contents

Advertisement

5

GAS SECTION

GAS INSTALLATION REQUIREMENTS

Important !
Before installation, make sure that the local distribution conditions (gas type and
pressure) and the adjustment of this appliance are compatible. The appliance
adjustment conditions are given on the plate or the label.
This appliance must be installed and serviced only by a suitably
qualified,registered installer with technical knowledge of both gas installation
and electricity.The installation or service must comply with the current editions
of the applicable standards,regulations,and codes of practice governing gas
and electrical installations.
Failure to install the appliance correctly could invalidate any manufacturer's
warranty.
This appliance is supplied for use on NATURAL GAS (NG 2000 Pa; check the gas
regulation label attached on the appliance).
CONNECTING THE COOKTOP TO THE GAS SUPPLY
Important !
The gas connection must be carried out by an authorised person according to
the relevant local standards.
If using a flexible hose,make sure it does not come into contact with moving parts.
If using a rubber hose,donot turn the house holder.
After connecting to the gas mains, check that the couplings are correctly sealed, using
soapy solution,but never a naked flame
20

Advertisement

Table of Contents
loading

Table of Contents