Table of Contents
Advertisement
CHOICE OF THE BURNER
The suitable burner must be chosen according to the diameter and the capacity used.
As an indication, the burners and the pots must be used in the following way:
DIAMETERS OF PANS WHICH MAY BE USED ON THE BURNERS
Auxiliary(Middle in fig. 1.1)
Ultra Rapid(Left and right in fig. 1.1)
It is important that the diameter of the pot be suitable to the potentiality of the burner so as
not to compromise the high output of the burners and therefore energy waste.
A small pot on a large burner does not give you a boiling point in a shorter amount of time
since the capacity of heat absorption of a liquid mass depends on the volume and the
surface of the pot.
BURNERS
do not use pans with concave or convex bases
MINIMUM
6 cm
18cm
Fig. 2.9
13
MAXIMUM
16cm
32 cm
Advertisement
Table of Contents
