Table of Contents
Advertisement
PAINTED PARTS AND SILKSCREEN PRINTED SURFACES
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion.
You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents as these will
irreparably damage the surface.
GAS TAPS
•
In the event of operating faults in the gas taps, call the Service Department.
BURNERS
•
These parts can be removed and cleaned with appropriate products.
•
After cleaning,the burners and their flame spreaders must be well dried and correctly
replaced.
•
It's very important to do so can check that the burner flame spreader and the burenr
(inner burner,outer burner,single burner) have been correctly positioned. Failure to do
so can cause serious problems.
•
Check that the electrode/s "G"(figs. 3.1) next to each burner is/are always clean to
ensure trouble-free spaeking.
•
Check that the probe/s "P"(fig. 3.1) next to each burner is/are always clean to ensure
correc operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Note: To avoid damage to the electric ignition do not use it when the burners are not
in place.
15
Advertisement
Table of Contents
