Table of Contents
Advertisement
5
GAS SECTION
1.SOFT PIPE CONNECTION
• Please use a soft pipe connector (see picture 1), and a special gas pipe to connect.
• The hose must be inserted to the red mark of the soft pipe and fixed with a clamp. The length
of the pipe should be less than 150cm.
• When the hose is connected with the soft pipe connector, please do not let the air inlet pipe
touch any part of the hob or be placed under the hob. Make suer the pipe is not pressed, twisted,
or bended by other objects.
• When assembled, please avoid the soft pipe from any force, otherwise, the connector will be
damaged. If damage is found during assembling, please stop and contact your local dealer.
• Please change the soft pipe every year.
WARNING:
PLEASE DO NOT USE A HOSE WITH POOR QUALITY OR OLE IN CASE OF GAS LEAKAGE,
POISONING OR FIRE HAZARD.
2.HARD PIPE CONNECTION
• For gas hob designed to use a spiral connector(see picture 2),please use spiral connect.
It can also be connected with hard pipe or metal soft pipe.
•
Please use a sealing pad when connecting, twist it tight with a spanner and hold the
hexagonal nut of the connector. Avoid damage of the hob.
•
If you need to assemble a soft pipe connector with the spiral one, please follow the
indication of the hard pipe connecting method, and avoid damage to the connector and
plastic pad.
13
Advertisement
Table of Contents
