Step 3; Assembly Completion - modway TWIN BED FRAME MOD-5430 Assembly Instruction

MOD-5430
TWIN BED FRAME

STEP 3:

Insert 2 piece of Side Plastic Cover (C) into each end of Slat (4) as shown.
Insert the assembled Side Plastic Covers (C) into the corresponding holes on Long Board (2) as shown.
Repeat the same steps for the remaining 11 pieces Slat (4).
C
4
C
2
2
Assembly is complete. Your bed frame is ready to be used now!
Ax24
Hardware & Tool required
Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3