Download Print this page
modway MOD-5431 Assembly Instruction

modway MOD-5431 Assembly Instruction

Full bed frame

Advertisement

Quick Links

MOD-5431
FULL BED FRAME
Thank you for purchasing the MODWAY FULL BED FRAME!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed frame, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approx assembly time: 45 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
Component:
3
4
1
Short Board
4
Center Rail
Customer Service 908-368-1025︱www.modwayfurniture.com
2
6
1
2
x2
5
x1
Hardware:
A
B
C
D
E
F
G
H
J
3
2
5
3
Long Board
x2
Support Leg
x2
Blot M8x20mm
Blot M6x35mm
Metal Support
Nut M6
Flat Washer
Allen Wrench
Open Wrench
Side Plastic Cover
Center Plastic Cover
1
3
3
Leg
6
Slat
x28
x4
x4
x4
x8
x1
x1
x24
x12
x4
x24
Page 1 of 3

Advertisement

loading
Need help?

Need help?

Do you have a question about the MOD-5431 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for modway MOD-5431

  • Page 1 MOD-5431 FULL BED FRAME Thank you for purchasing the MODWAY FULL BED FRAME! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
  • Page 2 MOD-5431 FULL BED FRAME STEP 1: Please put Short Boards (1), Long Boards (2) upside down on a carpeted or padded area. Attach 1 piece of Metal Support (C) to one corner of Short Boards (1) and Long Boards (2) by using 2 pieces of Bolt (A) as shown.
  • Page 3 MOD-5431 FULL BED FRAME STEP 3: Place Stretcher (4) to the assembled Long Board (2). Secure each end of Stretcher (4) by using 2 pieces of Bolt (A) and 2 pieces of Flat Washer (E) as shown. Tighten Bolts (A) by using Allen Wrench (F) clockwise until secure.