Cleaning; Storage; Troubleshooting - Silvercrest SDMF 1100 A1 Operating Instructions Manual

Steam brush with base
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
__296303_Dampfbürste_mit_Fuß_B6.book Seite 10 Dienstag, 24. Oktober 2017 1:16 13

7. Cleaning

DANGER! Risk of electric
shock!
Pull the mains plug 10 out of the wall
socket before you clean the device.
DANGER! Risk of injury
through burning!
Allow the device to cool down before
cleaning.
WARNING! Risk of material dam-
age!
Do not use any sharp or abrasive clean-
ing aids.
Cleaning the device
• For cleaning the device, use a soft,
moistened cloth.
• Dirt can be removed from the steam
unit 3 using commercially available
cleaning agents for chrome, silver or
stainless steel.
Descaling
If the steam power is reduced after a certain
time, please descale the device.
For descaling, you should use a com-
mercially available descaling agent
based on citric acid. Please follow the
instructions for the descaling agent.
1. Place the descaling agent into the wa-
ter tank 8.
2. Connect the mains plug 10 with the
wall socket. The control light 1 flashes.
3. Allow the descaling agent to work.
4. Press the steam jet button 4 and use the
steam brush to steam an old cotton
cloth.
10 GB

8. Storage

1. Pull out the mains plug 10.
2. Allow the device to cool down.
3. Remove the water tank 8 and open the
lid 7.
4. Pour any remaining water out of the
water tank 8 through the filling open-
ing 6.
5. Replace the water tank 8.

9. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Possible causes /
Fault
• Connect the device to
No function
the mains power supply.
Little or no
• Fill the water tank 8.
steam
• Descale the device.
• Fill the water tank 8.
• It may be necessary to
hold down the button for
Steam jet is
a longer time to trigger
not working.
the first steam jet.
• Leave a pause of a few
seconds between steam
jets.
Water is drip-
• Descale the device.
ping out of
the steam
unit 3.
Action

Advertisement

Table of Contents
loading

This manual is also suitable for:

296303

Table of Contents