Set Communication - ADF Web HD67C56-IP-B2 User Manual

Industrial Electronic Devices

SET COMMUNICATION:

By Pressing the "Set Communication" button from the main window for SW67C56 (Fig. 2)
the window "Set Communication" appears (Fig. 3).
In the section "BACnet Slave" is possible to select the type of BACnet to use from:
BACnet/IP (uses Ethernet);
BACnet MS/TP (uses RS485).
If selected "BACnet/IP" the means of the fields for "BACnet" are:
In the fields "IP ADDRESS" the IP address of BACnet/IP side of the converter is
defined;
In the fields "SUBNET
defined;
In the fields "GATEWAY" the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field "Port" the port used for BACnet communication is defined. The default
port used for BACnet communication is 47808, but is possible to insert any value;
In the field "BACnet Device
defined;
In the field "Device Identifier" the ID of BACnet/IP side of the converter is defined;
If the field "BACnet description up to 32
BACnet objects can be up to 32 chars.
ADFweb.com S.r.l.
Mask" the SubNet Mask of BACnet/IP side of the converter is
Name" the name of BACnet/IP side of the converter is
chars" is checked, the description of the
User Manual EnOcean / BACnet Slave
Document code: MN67C56_ENG Revision 1.000
Figure 3a: "Set Communication" window
Page 18 of 30