Table of Contents
Advertisement
To switch the tool on, press the on/ off switch (1).
To switch the tool off, release the on/ off switch.
For continuous operation:
1.
Press the on/off switch (1).
2.
Press the lock-on button (2).
3.
Release the on/off switch.
To switch the tool off when in continuous operation, press and release on/ off switch (1).
Emptying the Dust Bag (fig. G)
The dust bag should be emptied after 10 minutes of use.
1. Align the dust bag (8) with the tool and loosen the
clamp as shown.
2. Hold the spout down and shake the dust bag to
empty the contents.
3. Refit the dust bag onto the tool.
If necessary, the dust bag can be removed from its frame
and can be washed. Let it dry before refitting it.
Curved Arm (fig. H)
Use section A for grooving or sanding in the centre of
work pieces and in confined areas.
Use section B for curved surfaces.
Straight Arm (fig. I)
Use the normal and narrow arm for general use for
slotting and for making joints.
Tips for Optimal Use
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Artikel 61117
Seite 9
09
2020-1
Advertisement
Table of Contents
