Unpacking The Box - WilTec 61117 Operation Manual

Before using the tool on metal work pieces or work pieces containing metal make sure to remove

the dust bag.
Wear gloves when working with metal work pieces.

It is recommended that the tool always should be supplied by a residual current device with a rated

residual current of 30 mA or less.
Operation - Controls & Instructions
Components
A. On/ off switch
B. Lock-on button
C. Secondary handle
D. Straight arm
E. Belt tensioning lever
F. Belt tracking knob
G. Variable speed control knob
H. Dust bag
I.
J. Cranked arm

Unpacking the Box

Carefully unpack all parts and check that all the parts listed below are included. If any items are miss-
ing, immediately contact the seller.
Equipment:
10 pc P80 sanding belts – 1 set

3 x sanding arms

Instruction manual – 1 piece

© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Artikel 61117 Seite 6
09 2020-1