ENG
8.1 Mounting stand (SAKS010000)
The standard pedestal for the ultimateSAM Direct Steam Humidification
System may not always provide sufficient clearance between the distributor
and the bottom of the duct or AHU. For these situations, an optional
mounting stand (SAKS010000) is available. The mounting stand can position
the distributor as much as 386mm (15") above the floor. (See figure 8.a.)
Pedestal in
minimized position
standard position
"ultimateSAM - design" +03U0071EF - rel. 2.0 - 20150301
8. OPTIONS
Pedestal in
There may be instances in which additional clearance is required above the
distributor, particularly if a control valve and actuator are attached to the
inlet of a top feed system and must be positioned inside the duct or AHU.
In this case, the optional mounting stand can be used in place of the top
mounting bracket.
Fig. 8.a
32