Bausch Datacom DinBox RTU M4 Reference Manual page 43

Process information in monitor direction – for inputs:
• TI 1 MSP
•
TI 7 MBO
• TI 9 MME-A
•
TI 11 MME-B
•
TI 13 MME-C
• TI 30 MSP
•
TI 33 MBO
• TI 34 MME-A
• TI 35 MME-B
•
TI 36 MME-C
Process information in control direction – for outputs:
•
TI 45 CSC
• TI 46 CDC
• TI 48 CSE-A
•
TI 49 CSE-B
•
TI 50 CSE-C
direction
The direction, input for reading from, output for writing to the slave.
include in general interrogation
Normally "yes", all items should be included in interrogation, but for outputs this
may be set to "no".
include in events
If events should be generated for this item "yes" should be entered, otherwise
"no".
1 bit single point information
32 bit bit string
16 bit measured value, normalized value
16 bit measured value, scaled value
32 bit measured value, short floating point number
1 bit single point information with CP56Time2a
32 bit bit string with CP56Time2a
16 bit measured value, normalized value with CP56Time2a
16 bit measured value, scaled value with CP56Time2a
32 bit measured value, short floating point with CP56Time2a
single point command
double point command
set point command, normalized value
set point command, scaled value
set point command, short floating point number