Bausch Datacom DinBox RTU M4 Reference Manual page 39

12. at#login
13. at#logout
14. at#passwd
15. at#mbcfg
16. at#rootca
17. at#printca
18. at#startssrv
19. at#wolfdebug
20. at#dskfwupdate
OK
An interesting command is
at#info
Firmware Version: v1.3-16-g91a23bf_Jun 7 2019_10:30:12
Working mode: 104 Server
Serial Interface:
Network Band: UMTS Band I (2100 MHz)
Operator: Proximus
RSSI: 6
WAN IP: 10.35.0.10
OK
to check all basic parameters.
5.3 Remote configuration
It's possible to access the DinBox RTU M4 remotely via Telnet or HTML.
This option has to be enabled via the Configuration-Routing page.
Leaving either TELNET or HTML checked allows remotely access the TELNET server
or web server from the WAN interface.