KERN KFE-TNM Operating And Installation Instructions page 59

3. How to set tolerance weighing mode
 Press
repeatedly until
 Acknowledge with
 Press
repeatedly until
 Press
and current setting will be displayed.
 Select desired setting (bp 1, bp 2, bp 3) with
confirm by pressing
 Press
repeatedly to exit menu. The weighing system is
in tolerance weighing mode, i.e. from here occurs the
graduation if the weighed material is within the two tolerance
limits.
4. Weighing with tolerance range
 Tare when using a weighing container
 Put on goods to be weighed, tolerance control is started
Load below specified
tolerance
The indicator [LO] is
displayed
• The tolerance control is not active when the weight is under 20d.
• To delete limits, enter "00.000 kg".
KFE-TNM-BA_IA-e-1610
is displayed.
.
is displayed.
BEEP
.
Load within specified
tolerance
The indicator [OK] is
displayed
and
Load exceeds specified
tolerance
The indicator [HI] is
displayed
21