Generalities; Instructions Manual; Compliance With The Instructions; Warranty - INOXPA BALL Installation, Service And Maintenance Instructions

Generalities

2. Generalities

2.1. INSTRUCTIONS MANUAL

This manual contains information about the reception, installation, operation, assembly and mainte-
nance of the ball valve A640.
Carefully read the instruction prior to starting the valve, familiarize yourself with the installation, ope-
ration and correct use of the valve and strictly follow the instructions. These instructions should be
kept in a safe location near the installation area.
The information published in the instruction manual is based on updated data.
INOXPA reserves the right to modify this instruction manual without prior notice.

2.2. COMPLIANCE WITH THE INSTRUCTIONS

Not following the instructions may impose a risk for the operators, the environment and the machine,
and may cause the loss of the right to claim damages.
This non-compliance may cause the following risks:
- failure of important machine/plant functions,
- failure of specific maintenance and repair procedures,
- possible electrical, mechanical and chemical hazards,
- risk to the environment due to the type of substances released.

2.3. WARRANTY

The conditions of the warranty are specified in the General Sales Condition that have been delivered
at time of placing your order.
The machine may not undergo any modification without prior approval form the manu-
facturer.
For your safety, only use original spare parts and accessories. The usage of other parts
will relieve the manufacturer of any liability.
Changing the service conditions can only be carried out with prior written authorization
from INOXPA.
Please do not hesitate to contact us in case of doubts or if further explanations are required regar-
ding specific data (adjustments, assembly, disassembly, etc.).
4 INOXPA S.A.U.
10.110.30.03EN · (0) 2020/09