Boss Loop Station RC-5 Reference Manual page 14

Settings for the Entire RC-5 (SETUP)
Parameter Value
This sets the functions that are controlled when a control change message (controller numbers 80–87) is received
from an external MIDI device.
OFF
TRK PLY/STP
TRK CLEAR
TRK UND/RED
TRK REVERSE
TRK LEVEL1
TRK LEVEL2
TAP TEMPO
TEMPO UP
TEMPO DOWN
RHYHTM P/S
RHYTHM PLAY
RHYTHM STOP
RHYTHM LEV1
RHYTHM LEV2
CC#80 FUNC
MEMORY INC
CC#81 FUNC
MEMORY DEC
CC#82 FUNC
MEMORY LEV1
CC#83 FUNC
CC#84 FUNC
MEMORY LEV2
CC#85 FUNC
TRK REVERSE
CC#86 FUNC
TRK 1SHOT
CC#87 FUNC
REC ACTION
DUB MODE
AUTO REC
TRK START
TRK STOP
FADE TIME
REVERB
PATTERN
VARIATION
VAR.CHANGE
KIT
RHY START
RHY STOP
REC COUNT
PLAY COUNT
RHY FILL
RHY PART1–4
TONE LOW
TONE HIGH
14
Explanation
(Bold: default)
No function is assigned.
Switch between play/stop for track.
Clear the track.
Undo/redo recording or the most recent overdubbing for track.
Turn reverse play on/off for track.
Control the volume of track (LOOP LEVEL) in the range of 0–200.
Control the level in the range of 0–"maximum value, " with the LOOP LEVEL setting of track
as the maximum value.
Press the switch several times at the desired interval to specify the tempo.
Long press the switch (two seconds or longer) to return to the previous tempo.
Press the pedal to make the tempo faster.
Press the pedal to make the tempo slower.
Switch the rhythm between play/stop.
Play the rhythm.
Stop playing the rhythm.
Control the "LEVEL" (p. 10) of memory/RHYTHM in the range of 0–200.
Control the level in the range of 0–"maximum value, " with the "LEVEL" setting of memory/
RHYTHM as the maximum value.
Switch to the next memory.
Switch to the previous memory.
Control the "LEVEL" (p. 9) of memory/LOOP in the range of 0–200.
Control the level in the range of 0–"maximum value, " with the "LEVEL" setting of memory/
LOOP as the maximum value.
Control "REVERSE" of memory/LOOP.
Control "1SHOT" of memory/LOOP.
Control "REC ACTION" of memory/LOOP.
Control "DUB MODE" of memory/LOOP.
Control "AUTO REC" of memory/LOOP.
Control "START" of memory/LOOP.
Control "STOP" of memory/LOOP.
Control "FADE TIME" of memory/LOOP.
Control "REVERB" of memory/RHYTHM.
Control "PATTERN" of memory/RHYTHM.
Control "VARIATION" of memory/RHYTHM.
Control "VAR.CHANGE" of memory/RHYTHM.
Control "KIT" of memory/RHYTHM.
Control "START" of memory/RHYTHM.
Control "STOP" of memory/RHYTHM.
Control "REC COUNT" of memory/RHYTHM.
Control "PLAY COUNT" of memory/RHYTHM.
Control "FILL" of memory/RHYTHM.
Control "PART1"–"PART4" of memory/RHYTHM.
Control "TONE LOW" of memory/RHYTHM.
Control "TONE HIGH" of memory/RHYTHM.