Replacement Of Wear Parts; Decommissioning; Disassembly And Replacement; Preparing The Product For Storage/Later Use - Bosch REXROTH ActiveShuttle 1.0 Operating Manual

Decommissioning

55/68

10.5 Replacement of wear parts

Check the following components regularly for wear. Have the Bosch Rexroth Service
replace it if necessary:
• Drive rollers
• Cam rollers
• Rubber mat on the loading area
• Holding brake (see chapter 10.2.1)
11 Decommissioning
This product is a component which does not need to be decommissioned.
Accordingly, this section has been left blank.

12 Disassembly and replacement

12.1 Preparing the product for storage/later use

• Only set the product down on a fl at surface.
• Protect the product from mechanical stress.
• Protect the product from environmental infl uences, such as dirt and moisture.
• Observe the ambient conditions, see page 59.
3 842 560 593/2020-07 ActiveShuttle: ActiveShuttle 1.0, Bosch Rexroth AG