Table of Contents
Advertisement
30/68
Assembly
Table 9: Symbols used
1
2
SW13
M
= 20Nm
D
SW5
M
= 8Nm
D
1
2
3
A
B
C
X
Bosch Rexroth AG, ActiveShuttle: ActiveShuttle 1.0, 3 842 560 593/2020-07
7 Assembly
7.1 Ambient conditions
Always comply with the environmental conditions specifi ed in the technical data
(see page 59) are specifi ed.
7.2 Required tools
• Hex wrench (open-end) SW13.
• Hex socket wrench SW2.5 / SW4.
• Hammer
• Level
7.3 Symbols used
Connection with T-bolt and fl ange nut.
Make sure the T-bolt is in the correct position when inserting it into the slot and
tightening it. The notch at the head of the screw indicates the orientation of the
T-bolt.
1 = T-bolt insertion position in the slot.
2 = T-bolt clamping position in the slot.
Tightening torque: 25 Nm
Hex wrench
SW = wrench size ... mm
M
= required tightening torque ... Nm
D
Hex socket wrench
SW = wrench size ... mm
M
= required tightening torque ... Nm
D
Graphical depiction of the assembly steps.
The numbers correspond to the sequence of assembly steps in accordance with
the instructions in the accompanying text.
Graphical depiction of the designation of components.
The letters denote the components mentioned in the accompanying text.
Detail view from a different direction, for example, the back or the bottom side of
the product.
7.4 Unpacking the charging station
Risk of injury due to the heavy weight of the charging station!
Employ at least 2 persons for lifting the charging station out of the box..
Keep the transport packaging for further use (e.g. return shipment to the
manufacturer).
Dispose of the packaging material (fi lm, cardboard boxes etc.) in accordance with
the applicable regulations in your country.
CAUTION
Advertisement
Table of Contents
