Charging Station 1.0; Wear; Measures To Reduce Wear; Environmental Factors - Bosch REXROTH ActiveShuttle 1.0 Operating Manual

9.1.4

Charging station 1.0

Risk of injury due to incorrect pre-fuse!
Operation of the charging station with an incorrect pre-fuse can lead to serious
injuries or even death and equipment damage.

Only operate the charging station with a circuit breaker ≤ 16 A with triggering
characteristic B or C.
Risk of injury by bridging the charging contacts of the charging station!
By bridging the charging contacts, there is a risk of damage, sparks, overheating
and fi re.

Do not place any objects, especially electrically conductive or fl ammable
objects, in the area in front of the charging contacts of the charging station.
Risk of injury and possible damage due to incorrect use!
When climbing or stepping onto the charging station, there is a risk of injury from
falling and of damage to the housing of the charging station.

Do not use the charging station 1.0 as a stepladder or climbing aid.
9.1.5

Wear

• Individual components are subject to unavoidable wear by their very nature.
Constructive measures and the selection of materials help ensure functional
reliability over the full service life. However, wear is also dependent on the
operating, maintenance and ambient conditions at the place of use (resistance,
contamination).
9.1.6

Measures to reduce wear

The following commonsense measures will reduce wear:
• Avoid contamination caused by abrasive media, reduce contamination by cleaning
on a regular basis.
9.1.7

Environmental factors

• Avoid any contact with highly reactive acidic or alkaline materials.
• Wear can increase signifi cantly in the case of contamination with abrasive media in
the environment in particular; these include sands and silicates from construction
work, for example, as well as from processes (e.g. welding beads, pumice dust,
shards of glass, or loose and easily lost items). Maintenance intervals should be
signifi cantly reduced under these circumstances.
• Resistance to media and contamination does not mean that functional safety is
guaranteed in every case.
– Liquids that thicken as they evaporate and become highly viscous or adhesive
(sticky) can lead to malfunctions.
In such instances, special care must be taken when planning the system, and the
maintenance intervals must be correspondingly shortened.
3 842 560 593/2020-07 ActiveShuttle: ActiveShuttle 1.0, Bosch Rexroth AG
WARNING
CAUTION
Operation 51/68