Connection Profiles - Hughes EchoStar Mobile 4500 User Manual

Connection Profiles

Chapter 3 • Using the Web UI
20
H62751 Revision B
This page allows to configure the user data connections (Shared and Dedicated)
choosing the APN Profile and the Activation Method.
• Connection Watchdog – This section allows the user to enable the
Connection Watchdog feature.
When the feature is enabled, the traffic on the space link is monitored and
the terminal will reboot if there is no traffic detected during the
monitoring period. The user can also configure the following:
• Traffic Monitoring
— Do not monitor
— Monitor only incoming
— Monitor only outcoming
— Monitor bi-directional
• Traffic Monitoring Timeout
The default duration is 60 minutes. If the user wants to change the
duration this needs to be at least 5minutes.
Note: The Traffic Monitoring Timeout needs to be programmed for a
longer duration than anticipated rate of user traffic to avoid
unnecessary reboots.
Figure 12: Connection Profiles screen