Table of Contents
Advertisement
Chapter 3 • Using the Web UI
28
H62751 Revision B
To upgrade the Terminal Software, follow these steps:
1. Store the Terminal Software Package on the local drive of a computer
attached to the terminal.
2. Select the "Browse" button.
3. Navigate to the storage location of the Software Package, select the file
and click "Open."
4. Click the "Start Update" button:
Note: The file selection can be cleared by clicking the "Clear" button.
The terminal will copy the Software Package from the computer to the terminal
and prepare the terminal for the SW upgrade.
After the Software Package is uploaded and verified the Web UI will present the
components which are ready to be installed.
Click the Install button to start the installation process. This will deactivate all
active connections and calls and place the terminal into service mode. After the
software installation is complete the terminal will automatically reboot.
Progress of the installation process is indicated to the user with a series of
updates on the Web UI.
After the reboot the software version can be verified on the Support page.
• Terminal information – This section provides detailed information about
the terminal hardware and the installed software. Provide this
information when requested by support technicians.
• SIM information – This section provides detailed information about the
SIM card installed in the terminal. Provide this information when
requested by support technicians.
Figure 22: Information screen
Advertisement
Table of Contents
