Advertisement
MN004519A01-AK
Chapter 4: Main Menu
the radio. The radio then sends the information within a Location Information Protocol message to the
Switching and Management Infrastructure, and a mapping application decodes the information to
calculate the location of the radio.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Indoor Location.
4 Select BT Settings→Indoor Loc.
5 Select Change.
6 Select On or Off to activate or deactivate Indoor Location.
Your radio is now able to detect Bluetooth location beacons when Indoor Location is activated.
NOTICE: The use of the Indoor Location feature may have a negligible impact on other
Bluetooth functions on your radio.
4.8.6.1
Viewing Detected Beacons
Prerequisites:Turn on Indoor Location. If Indoor Location is turned off, the screen displays Service
Restricted.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Indoor Location.
4 Select BT Settings→Indoor Loc..
5 Select Beacons Found.
6 Select the preferred beacon.
The screen displays details of the beacon.
4.8.7
Connecting Firearms Devices
Prerequisites:Only pre-approved firearms devices can be used. The service provider is responsible
for configuring the radio to work with specific devices. See
When and where to use:To select a firearm sensor device for Bluetooth connection.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Firearms.
4 Select BT Settings→Firearms.
96
Add Bluetooth Devices on page
117.
Advertisement
