Advertisement
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the
PTT button to listen.
NOTICE: To cancel making a group call, do one the following actions before the talk
permit is granted (depending on your service provider's settings):
•
Release the PTT button.
•
Press the END key (default).
When the call is canceled, your radio displays Call Cancelled message (if configured
by your service provider).
3.1.3
Receiving Group Calls in Idle
Procedure:
1 Your radio receives a Group Call.
NOTICE: The incoming Group Call is signaled by a Receiving Group Call tone.
2 To respond, press and hold the PTT button.
3.1.4
Receiving Group Calls during Ongoing Group Calls
While in active Group Call, your radio receives a Group Call with a higher priority.Your radio is forced
to end the current Group Call and automatically join the incoming one.
One of the following occurs:
•
Your radio is forced to end the current group call and automatically join the incoming one.
•
Your radio displays incoming group call screen with options:
-
Join – ends current Group Call and starts the incoming one.
-
End – cancels the incoming Group Call.
3.1.5
D-PTT Preempt Group Call
NOTICE: This is a Software Selling Feature.
The D-PTT Preempt Group Call allows superiors to take over and speak in an ongoing group call by
making preemptive priority calls.
NOTICE: Your radio can only support either the D-PTT Tone feature or D-PTT Preempt Group
Call feature at a time.
By pressing the PTT (Push-To-Talk) button twice, you make a preemptive request to temporarily
interrupt an ongoing group call and gain permission to speak.
If your group call is preempted and you are still pressing the PTT button, your radio displays the PTT
Denied prompt.
If your service provider enables the visual notification, your radio displays the PTT Interrupted
prompt throughout the group call preemption, even if you no longer hold the PTT button.
MN004519A01-AK
Chapter 3: Modes
55
Advertisement
