Advertisement
Figure 15: RCU Tone Button
No.
1
NOTICE: The RCU is a small third-party device attached to your covert radio over a wire.
2.15
Over The Air Programming
NOTICE: This is a Software Selling Feature.
Over The Air Programming (OTAP) enables remote radio reconfiguration over TETRA network.
Prerequisites:Your radio display shows an OTAP prompt with Reboot required. Accept new
configuration? text for a new configuration update.
Procedure:
1 Select Yes to accept or No to reject the new configuration update.
NOTICE: A timer is set when the prompt is displayed. Request is automatically rejected if
there is no user response to the prompt when the timer runs out.
When the OTAP installation prompt is accepted, your radio updates with the new configuration as
received over OTAP. Visible indication guidance and update status is provided during the update.
When the OTAP installation prompt is rejected, your radio returns to idle mode.
1
Description
RCU Tone Button
MN004519A01-AK
Chapter 2: Getting Started
49
Advertisement
