Advertisement
•
GC Optimized – the Bluetooth audio link is kept open all the time. This option ensures
that audio during group calls is heard without any delay and the audio link is never lost,
but shortens the battery life time.
NOTICE: This setting does not affect the Motorola Solutions headset with PTT
(NNTN8143_ or NNTN8191_) as it is always in the GC Optimized mode.
•
Indoor Loc. – toggle on/off Bluetooth location mode.
•
Sensor Alert – toggle on/off sensor alert.
4.8.2
Enabling and Disabling Bluetooth
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Bluetooth: On / Bluetooth: Off.
4 Select BT Settings→Bluetooth
5 Select On to enable, or Off to disable Bluetooth.
NOTICE: Bluetooth is enabled automatically when you access Add Device sub-menu
(see
Add Bluetooth Devices on page
Touch Button.
When Bluetooth is enabled, the Bluetooth icon appears in the status icon area on the display.
However, the Bluetooth icon may not be visible at times, due to other icons with higher priority
being displayed in the same icon slot.
NOTICE:
Your service provider may configure the radio to automatically disable Bluetooth after
entering the home mode. The home mode is a state in which all the following conditions
are met: the radio is not in the Discoverable Mode, all active remote devices are
disconnected (including file transfer), and scanning for remote devices is not performed.
4.8.3
Pairing Bluetooth Devices with Your Radio
Pairing is a process that creates a link between two Bluetooth-enabled devices. Once paired, devices
remember each other and every subsequent connection between them is authenticated automatically.
When and where to use:To scan for available Bluetooth-enabled devices and to connect with them.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Add Device. Ensure that the device you want to connect with is in pairing
mode.
The radio lists available devices that can be paired with your radio.
4 Select BT Settings→Add Device. Ensure that the device you want to connect with is in pairing
mode.
The radio lists available devices that can be paired with your radio.
117). You can also enable Bluetooth using the One
MN004519A01-AK
Chapter 4: Main Menu
93
Advertisement
