Advertisement
MN004519A01-AK
Chapter 4: Main Menu
If...
5 To end the call, press the Back key.
4.3.2
Making Phone or PABX Calls
Prerequisites:This feature is only available in Trunked Mode Operation (TMO).
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Dialer and enter a number.
3 If Phone or PABX is not the first type of call presented, press the P2 or P3 programmable
button repeatedly to select it.
4 Depending on the mode, perform one of the following actions:
If...
If you are making a MSISDN Simplex Call,
If you are making a PABX or PSTN Call,
5 To end the call, press the Back key.
4.4
Messages
The messages feature allows you to send and receive text messages. A message can contain up to
1000 characters, depending on your service provider settings.
Pressing the PTT button when a message is highlighted can cause one of the following actions,
depending on your service provider settings:
•
The radio ignores the PTT button request.
•
The radio starts a Private Call with the message sender.
•
The radio starts a Group Call on a currently selected talkgroup.
For details on writing a text message, see
4.4.1
New Message
This menu item allows you to create a new message.
See
Writing Text on page 35
72
Writing Text on page 35
for text entry method on your radio.
Then...
You hear a ringing tone until the called
party answers the call.
Then...
a Press the PTT button.
b Wait for the Talk Permit tone before talk-
ing.
a Press and hold the Menu/OK key.
b Select Call.
You hear a ringing tone until the called
party answers the call.
.
Advertisement
