Advertisement
MN004519A01-AK
Chapter 2: Getting Started
Covert Solution enables you to completely shut down all visible and audible alerts and notifications,
making the radio unnoticeable even in a silent and dark environment.
The Covert Solution is only available through One-touch button.
All audio activities are suppressed to the built-in speaker and microphone, and the audio is routed to
and from the accessory only. If there is no accessory connected, the audio is routed to the small
earpiece on the radio.
When the Covert Solution is turned on:
•
The screen is disabled.
•
All buttons are disabled except for the following buttons:
-
PTT
-
Emergency
-
Covert Solution One-touch button (to exit Covert Solution)
•
The LED indicator is disabled.
•
Change folder and talkgroup through MMI, over the air, and RCU.
When the Covert Solution is turned off, the following settings remain:
•
Volume
•
TXI
•
Emergency
When paired with a Remote Control Unit (RCU), you are able to communicate using Mission Critical
Communication Tones. The RCU is a third-party device that sends out tones as beeps in a group call.
Pressing the button for tones on the RCU starts the group call and each press of the button produces
beeps which are heard by all recipients and the initiator. To transmit a voice call in Covert Solution on
the RCU, press the PTT button on the RCU. If an earpiece accessory is not connected to the radio, the
voice call is routed to the low audio speaker of the radio.
2.14.1
Sending Mission Critical Communication Tones
Procedure:
1 Press the RCU Tone button.
Morse code tone pulses is heard from your audio accessory, and transmitted to the receiver.
NOTICE: You cannot send Morse code during an active voice transmission.
48
Advertisement
