Troubleshooting; Controller Error Messages - Baumuller b maXX 3000 Instruction Handbook Manual

8.1

Controller error messages

Error detection The lightning-up of the red LED on the controller front signals an error state of the con-
troller (refer to error detection in the operation handbooks BM3000 or BM5000).
The Control Panel covers this LED. An error state is displayed by an F and the following
error code in the status bar of the Control Panel.
Display of all error codes
h Display of error codes, see
h Quit errors, see
Quit errors
F
Display drive status
Drive status of the controller or
in error state display of the error code
using double axis devices 2 characters
n Basic menu drive status
n Error information
ZReset/quit errors–
n Basic menu drive status
n Soft key R. Err
T4
Instruction handbook Control Panel BM3000/BM5000
T
ROUBLESHOOTING
8
F
ZRead error list–
on page 57
(Drive Status)
on page 57
(Drive Status)
Document No. 5.12068.01
61
of 68