Parameter Set Management; Load Parameter Set From Controller - Baumuller b maXX 3000 Instruction Handbook Manual

7.4
Basic menus
7.4.2

Parameter set management

This menu enables the Control Panel to save to or load from the controller up to 3 pa-
rameter sets. Each parameter set can be consist of up to 7 (selectable) data sets (config-
urations of the drive).
For this 3 non-volatile storage areas, each
Parameter
Parameter Set
Configuration
<< >>
ΟΚ

7.4.2.1 Load parameter set from controller

The parameter set filed in the controller flash memory is load after selecting the data set
storage No. 1 ... 3 with PREV (T2) and NEXT (T3) and pressing the OK key (T4).
Parameter Set
Load From Controller
Save To Controller
<< >>
↑
38
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
of 68
1
Parameter Set
T3 >>
Configuration
Info
↑
Parameter Set
Load From Controller
Select Parameter Set: 2
[empty]
↑
2.1
Parameter Set
T4 OK Load From Controller
Select Parameter Set: 1
[empty]
ΟΚ
↑
kByte are provided.
2
T4 OK
Parameter
Set
<< >>
ΟΚ
A1
2.1.1
T4 OK
<< >> ΟΚ
T3 >>
next
parameter set
A1 2.1.1
T4 OK
<< >>
ΟΚ
Parameter Set
Load From Controller
Save To Controller
<< >>
ΟΚ
↑
loading
parameter set 2
A1
2.1.1
Load From Controller
Select Parameter Set: 1
<< >>
ΟΚ
↑
Baumüller Nürnberg GmbH
2.1