5.1
What to observe when transporting
For initial transport of a device, it is packed at the manufacturer's plant. If the device must
be transported, ensure that the following conditions are met throughout the entire trans-
port:
m Climate class 2 K 3 as per EN 60721-3-2
m Temperature range - 30 °C up to + 70 °C
m Vibration, shock, continuous shock class 2 M 1 as per EN 60721-3-2
5.2
Transport inspection
Upon receiving the delivered goods, immediately examine them for completeness and
transport damage.
If there is visible transport damage on the outside, proceed as follows:
m Do not accept the delivery or conditionally accept it with reservations.
m Note the extent of the damage on the transport documents or on the delivery note of
m Immediately file a complaint with the freight carrier. Have the complaint confirmed in
NOTE!
The device may not be operated if there is visible transport damage!
T
RANSPORT AND
5
the shipping agent.
writing and immediately contact the responsible representative of Baumüller Nürnberg
GmbH.
Instruction handbook Control Panel BM3000/BM5000
P
ACKAGING
Document No. 5.12068.01
25
of 68