Predefined Parameter List - Baumuller b maXX 3000 Instruction Handbook Manual

7.4.3.6 Predefined parameter list

20 parameters can be set in this sub-menu. This parameters can be displayed and/or ed-
ited in dialog „Predefined Parameter List".
It is possible to set a list of parameters, displayed or changed frequently.
This parameter list is displayed immediately after switch-on the controller or plugging the
Control Panel to a switched-on controller, if the Predefined Parameter List is selected
for start screen (see
No parameters are set by delivery status.
All selected parameters are deleted, if the Control Panel is reset to delivery status, see
ZReset Control Panel–
All parameters, with a few exceptions can be selected for Predefined Parameter List.
h The check box activates or deactivates the parameter.
ZStart screen–
on page 52.
3.6.1.1
A1
Drive manager
Status word 1
⌧ Id 1: P108.003.0.0
ΟΚ
CLR
↑
T4 longer > 1 s
ENTER
next ID
A1 3.6.1.2
Id 2: P000.000.0.0
ΟΚ
↑
SET
Instruction handbook Control Panel BM3000/BM5000
on page 46).
T2 CLR
Drive manager
Status word 1
Id 1: P108.003.0.0
↑
T2 SET
Document No. 5.12068.01
Operation
3.6.1.1
A1
ΟΚ
SET
7
49
of 68