New Components - KitchenAid KMTM704E Series Technical Education

GENERAL INFORMATION
Advanced ProDry™ (Side Dry)
The Advanced ProDry Option uses a heating element, plus
a system of vents and a fan on the side of the tub to ensure
effective drying for all items.
1. Humid air is drawn into a side vent by a fan.
2. Dry air mixes with humid air to improve drying
performance.
3. Air is exhausted into the kitchen through bottom front vent.
2
Figure 2 - Advanced ProDry™
Dynamic Wash Arm
Nine arms provide complete water coverage to get every dish
clean no matter the placement on the rack. The unique nozzle
spacing directly sprays even hard-to-reach places to get every
dish clean.
Small secondary arms - timed
out of phase with larger arm to
optimize side wall coverage.
Large secondary arm -
engineered nozzle spacing to
optimize corner coverage.
Figure 3 - Dynamic Wash Arm
KitchenAid 2015 Microfiltration Dishwashers
n
1-4

New Components

1
3
ProScrub® Trio Bottlewash
The ProScrub® option helps eliminate soaking and pre-
scrubbing by using a system of 40 jets to create a powerful,
targeted wash zone on the upper dishwasher rack. These jets
power away tough baked- and caked-on foods.
Three articulating nozzles on each side. (See Figure 4)
Figure 4 - ProScrub® Trio
A: When the nozzle is in the horizontal position, water sprays
from the base.
B: When the nozzle is rotated upwards, water sprays from
top of the nozzle.
The window allows you to
see the interior lights come
on to signal the end of the
cycle. The interior lights will
go out automatically after 10
minutes of inactivity.
Figure 5 - Bottlewash Nozzles
A
B