Advanced Prodry™ (Side Dry) - KitchenAid KMTM704E Series Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Advanced ProDry™ Components
Air Outlet Ass'y
Retainer Clip
Exhaust Tube
4-4 KitchenAid 2015 Microfiltration Dishwashers
n
Advanced ProDry™ (Side Dry)
Rubber Seal
Air Assembly Nut
Vent Hose
Blower Ass'y
Figure 1
Advanced ProDry™ Components
1. Unplug dishwasher or disconnect power.
2. Access ProDry™ components on left side of tub (see
Figure 2). To disassemble ProDry™ components; unscrew
air assembly nut from inside tub, disconnect vent hose,
then slide exhaust tube and air outlet assembly up and
out of blower assembly to remove.
Air Outlet Ass'y
Retainer Clip
Vent Hose
Exhaust Tube
Blower Ass'y
3. From underneath the tub, disconnect the harness and remove
the blower vent from the Blower Assembly (see Figure 3).
4. Remove the two (2) 1/4" screws securing Blower Assembly
to dishwasher and remove assembly (see Figure 3).
Blower
Connector
Figure 2
Blower
Assembly
Figure 3