Interior Led Lighting - KitchenAid KMTM704E Series Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.

Interior LED Lighting

(Available on some models)
1. Unplug dishwasher or disconnect power.
2. Access the LEDs on top of the tub (see Figure 1).
3. Remove harness from LED connector (see Figure 2).
4-6 KitchenAid 2015 Microfiltration Dishwashers
n
Interior LED Lighting
Figure 1
Figure 2
4. Unscrew large plastic nut securing the LED to top of tub
(see Figure 3).
5. From the top, push the LED down into the tub. Reverse the
procedure to reinstall new LED kit. See Figure 4.
6. Order LED Kit when replacing defective LED.
LED Kit Contents (see Figure 5).
LED
Figure 3
Figure 4
Gasket
Nut
Figure 5