KitchenAid KMTM704E Series Technical Education page 77

Removing Sump Assembly (continued)
OWI
Diverter
Motor
Lower Spray
Arm Motor
7. With the sump assembly flipped over inside the tub,
disconnect the following harness:
Refer to Figure 9 for harness locations:
n diverter position switch harness
n diverter motor harness
n lower spray arm motor harness
n wash motor harness
n OWI harness (or remove OWI from sump)
8. Pry off harness clip from sump (see Figure 10). Remove
sump assembly from dishwasher.
Harness Clip
Figure 10
Diverter
Position Sw
Figure 9
NOTE: When reinstalling the sump assembly, align the tab on
the assembly with the slot in the tub. See Figures 11 and 12.
KitchenAid 2015 Microfiltration Dishwashers
COMPONENT ACCESS
Wash
Motor
Figure 11
Figure 12
4-23
n