65A to 200A
Parts within the flame are consumable. Please contact us for purchase of these consumable parts.
Note (*1): Apply a liquid sealant for heat and steam resistant (Recommendation: SOLVEST
110) to the sealing surface of the diaphragm bottom and the top cover.
(*2): For size 15A to 125A, attach the tee with turning upward the slit part. In addition,
for size 150A and 200A, it is equipped with an orifice between tee and pipe B and
pipe C respectively. Therefore, direction of tee is arbitrary. (Refer to following
figure.)
Size 15A to 125A
(Upward the slit part)
Size 150A,200A
(Please confirm the
orifice is attached to
Pipe B and C.)
-16-
■EPDT-014f■