Cleaning And Servicing - Bosch MUZ6MM Series Instruction Manual

en

Cleaning and servicing

Reversible shredding disc –
coarse / fine
For shredding vegetables, fruit cheese,
except for hard cheese (e. g. Parmesan).
Process at setting 3 or 4.
Important information:
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only (at setting 4).
Grating disc – medium-fine
For grating hard cheese (e.g. Parmesan),
cooled chocolate and nuts.
Process at setting 4.
Important information:
The grating disc is not suitable for grating
soft cheese and cheese slices.
X Fig. C
■ Place the bowl on the base and
rotate all the way in an anti­clockwise
direction. Lug (1.) must engage in the
slot (2.) on the handle (Fig. C-4).
■ Place slicing or shredding disc with the
required side face up on the disc holder.
Carefully take hold of discs by the
edge!
Note:
Only one side of the grating disc can be
used.
■ Insert the disc holder. In doing so, hold
the hub (Bild C-6).
■ Attach cover (note mark) and rotate in
an anti­clockwise direction as far as the
cover lug (1.). Cover lug must engage in
the slot (2.) on the handle (Fig. C-7).
■ Place multi­blender on the drive, paying
attention to the mark. Rotate the bowl
as far as possible in an anti­clockwise
direction.
■ Turn the switch to the required setting:
Setting 1 or 2 for soft and crumbly
foods, otherwise setting 3 or 4.
■ Put food to be processed in the filling
shaft and push down gently with the
pusher, observe filling height. The
maximum filling height is located on the
lower edge of the disc holder hub.
12
Tip: To ensure evenly cut ingredients,
process slender ingredients in bunches.
Note: If ingredients to be processed
become jammed in the multi­blender, switch
off the food processor and pull out the
mains plug. Wait until the drive comes to a
standstill. Take multi­blender off the drive,
remove cover from the multi­blender and
empty filling shaft.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Pull out the mains plug.
■ Rotate multi­blender in a clockwise
direction and remove from the
appliance.
■ Remove the cover by rotating it in a
clockwise direction.
■ Remove disc holder with attached
cutting disc.
■ Empty multi­blender.
■ Rotate the bowl in a clockwise direction
and remove from the drive base.
■ Clean parts.
Cleaning and servicing
W Risk of electric shock!
Before working on the appliance, pull out
the mains plug.
Caution!
– Do not use abrasive cleaning agents.
Surfaces may be damaged.
– The drive is not dishwasher­proof.
All parts, except the drive base, are
dishwasher­proof. Do not wedge plastic
parts in the dishwasher as they could warp.
Insert the universal blade with the tapered
opening downwards so no damage can
be caused to other parts. Wipe drive base
with a damp cloth. If required, use a little
washing­up liquid. Then wipe dry.
Subject to change without notice.