After Using The Appliance; Cleaning And Servicing - Bosch MUM Series Instruction Manual

en
Check that the red locking lever on the

blade insert is completely locked (detail
image 5). If it is not completely locked,
the attachment cannot be placed on the
base unit!
Turn the attachment over.

Working
Detail images 6–11
Press release button and move swivel

arm to vertical position.
Cover unused drives with drive covers.

Remove the blender drive cover.

Put on attachment (arrow on the blade

holder points to arrow on the base unit)
and press downwards (detail image 8).
Turn attachment all the way anti-

clockwise (dot on the blade holder points
to arrow on the base unit, detail image 9).
Insert the mains plug.

Turn rotary switch to setting M and hold.

The longer the appliance remains
switched on, the finer the ingredients are
cut.
In the case of herbs the required cutting
result can be achieved very quickly after
switching the appliance on. A brief "tap"
on setting M may be adequate.
Note:
Recommendations on using the accessories
can be found in the section "Recipes".
Figure  shows guide values for the maximum
quantities and processing times when working
with the different attachments.

After using the appliance

Risk of injury from rotating drive!
Do not touch blender blades with bare
hands.
Detail images 12–17
Release rotary switch.

Remove mains plug.

Turn attachment clockwise and remove.

Turn the attachment over.

Loosen blade holder by turning it

clockwise and remove.
Attach blade guard and press into place.

Place lid on the container and close by

turning it anti-clockwise ( ).
10
10
Tip: Preferably clean the attachment
immediately after use. The blade insert can be
cleaned thoroughly by taking it out of the blade
holder (see "Cleaning and servicing").

Cleaning and servicing

Risk of injury from sharp blades!
When working with the blade insert
(assembly, disassembly, cleaning),
always attach the blade guard.
Do not touch blade with bare hands!
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Blade inserts, container and lid are
dishwasher-proof.
The blade insert can be cleaned thoroughly
by taking it out of the blade holder.
Fig. 
Turn the blade holder over (with blade

guard attached).
Press the lugs together on the blade
▯ Press the blade insert out of the centre

insert and take out of the blade holder.
of the blade holder.
To re-assemble, grip the blade insert by

the blade guard and insert into the blade
holder. Press it down into place.
Tip: To preclean the appliance, put a little water
and washing-up liquid in the attachment
immediately after use. Close with blade holder
and place on the food processor. Switch on for
a few seconds (setting M). Pour out water and
rinse parts with fresh water.
Recipes
Note:
You may not have the accessories for all the
recipes. The blender attachment is required for
the recipes identified with *.
Mediterranean spice mix
9 g dried rosemary
14 g dried caraway seeds
6 g dried coriander seeds
3 g dried oregano
2 g dried cinnamon sticks
5 g coarse salt
Tools: Grinding attachment and blade insert
with grinding blade (black seal)
Put all ingredients in the glass container

and close with the blade holder.
Grind for 90 seconds on setting M.

Robert Bosch Hausgeräte GmbH